| DESCRIPTION |
UNIT |
VALUE |
| Diameter of rotation over the bed |
mm |
660 |
| Max.distance between centers |
mm |
1500 |
| Max. diameter of rotation over the transverse sled |
mm |
450 |
| Max. diameter of rotation over the recess |
mm |
660 |
| Spindle nose type and code |
|
D8 |
| Spindle front hole taper |
|
Metric system1:20 |
| Spindle speed range |
rpm |
9 ~ 1600 |
| Maximum cutting force (Pz) |
N |
13700 |
| Maximum feed force allowed (Px) |
N |
3400 |
| Spindle speed step |
|
24 steps |
| Standard chuck |
inch |
K11 315 |
| Longitudinal screw pitch |
mm |
12 |
| Transverse screw pitch |
mm |
5 |
| Rapid travelling speed of transverse |
m/min |
1.9, 50 Hz |
| Rapid travelling speed of longitudinal |
m/min |
4,5, 50 Hz |
| Metric thread range and number of types |
mm |
48 sorts 0,5-224 |
| Inch thread range and number of types |
tpi |
48 sorts 72~1/8 t/in |
| Modulus thread range and number of types |
mm |
42 sorts 0,5~112 |
| Radial thread range and number of types |
Dp |
45 sorts 56~1/4 Dp |
| Vertical distance from the tool support |
mm |
28 |
| Maximum allowable tool section |
mm |
25× 25 |
| Engraving value of rotation angle of center tool |
|
±90° |
| Max.stroke of upper tool holder |
mm |
145 |
| Max. lateral stroke of lower tool holder |
mm |
340 |
| Tailstock sleeve diameter |
mm |
75 |
| Tailstock sleeve stroke |
mm |
150 |
| Lateral movement of the tailstock |
mm |
±15 |
| Main motor |
kW |
7.5 |
| Rapid-travel motor |
kW |
0.3 |
| Cooling motor |
kW |
0. 125 |
| Cooling electric pump flow |
L/min |
25 |
| Machine dimension (L x W x H) |
mm |
3125×1071×1395 |
Reviews
There are no reviews yet.