Demonstration Set “Electrodynamics”
January 8, 2025
Laboratory Stand “Transformers”
January 8, 2025
Laboratory Stand “Automation Equipment Installation”
$13,191.00
This stand enables users to learn the installation and configuration of automation equipment. It is ideal for understanding the setup and operation of programmable logic controllers (PLCs) and other automation devices.
Electrical installation complex. A set of installation equipment with a set of technical documentation is attached to the panel. The recruiting field is made of an aluminum profile and has special brackets for quick installation and fixation on the frame. The equipment under study is mounted on the recruiting field. After installing the devices, the installation is carried out according to the developed (given) scheme. It is possible to install temperature and humidity sensors in the ventilation duct . The pressure sensor is mounted on the recruitment field using a special base with threaded holes and fittings.
A set of laboratory equipment for installation and study includes:
- channel heater D100mm ~ 220V, 1.2 kW- 1 pc.;
- channel fan D100 mm with a removable central unit – 1 pc.;
- a set of pipeline segments and fastening of ventilation systems D100 mm – 1 set ;
- meter-regulator with two universal inputs, one relay output and one 4-20mA analog output – 2 pcs.;
- humidity and temperature meter with remote probe – 1 pc.;
- seven- sided power regulator with digital control 16A, ~220V – 1 pc.;
- thermocouple in a sleeve with a cable outlet- 1 pc.;
- thermal resistance in a sleeve with a cable outlet – 1 pc.;
- 1.0MPa overpressure transducer with 4-20mA output – 1 pc.;
- control post housing for 2 sockets – 3 pcs.;
- control post housing for 3 sockets- 2pcs.;
- magnetic starter ~220V – 4 pcs.;
- attachment for magnetic starter – 2 pcs.;
- socket for installation on a din- rail ~220V with a grounding contact – 1 pc.;
- sound alarm (bell) for installation on a din rail ~220V–2 pcs.;
- lighting fittings for installation in the control post ~220V – 4 pcs.;
- buttons for installation in the control post – 6 pcs.;
- terminal connectors for installation on a din rail – 40 pcs.;
- limiters for din rail –10pcs .;
- terminal clamps – 10 pcs.;
- automatic switch 2-pole 10A – 1 pc .;
- automatic switch 2-pole1A- 2pcs.;
- automatic switch 1-pole 1A – 2 pcs.;
- perforated box 25×40 mm – 5 m;
- din rail 35mm–5m;
- fastening set – 1 set
Technical characteristics:
Power supply ~ 220 V, 50 Hz ;
Power, kW –2.0;
Overall dimensions(mm):
width – 1310, height – 850, depth – 590; weight, kg – 50
